Yarn: Hedgehog Fibers DK in Deep End and Treasure Goddess Yarns DK in Gunsmoke
Needles: US 6
Mods: I followed the pattern except for omitting the stripes and did my own color thing. I as well only knit the body for as long as I could go with running out of black yarn.
I’m just pleased as punch with now well this turned out and how cute it is next to my sweater. But, as I examined the photos I realized I BUTCHERED the raglan placement. The variegated yarn really hides the fact that raglan lines are askew to what you would normally expect. I’m sure this deviation was due to knitting while zooming in to a virtual yarn retreat. But I still managed a sweater shape and it fits PB. But my project photos DEFINITELY do not look like the rest of the finished objects on Ravelry.
I used up close to 433 yards of yarn to make size 5 child size. It’s a bit big on PB but that just means she has room to grow!
And the best of all? I even got her to put it on at the same time I was wearing my sweater and pose for photos. It was an evening, not the best light and we were both tired. But it’s a memory regardless. Maybe someday we will take ‘fancy’ photos but for now we are just going to be cozy in our sweaters!
Don’t mind me, I’m over here on cloud nine and reveling in fall weather. My Radiate is complete and I am over the moon. Thank goodness for portrait mode in iPhone and actually putting on jeans and makeup. Really gives a good mood boost in the dumpster fire that is 2020.
Pattern: Radiate by Jojo Locatelli
Yarn: Hedgehog Fibers DK in Deep End (blue) and Treasure Goddess Yarns DK Treasures in Gundpower
Needles: US 6s
Mods: Split hem at the bottom instead of a bottom solid band
I may have lengthened this sweater to cover my shelter in place enhanced bum. But I think the length really ends up flattering around what is usually my thickest section. I couldn’t be more happy with how the indie dyed black yarn played out. Absolutely no issues with pooling, flashing or lines between my skeins. But I did alternate skeins using the helical method.
I used less than one skein of the blue color and just under four and a half skeins of the main black color. All told I used 1,380 yards of DK weight yarn for the large to extra large size. I honestly can’t remember what I picked. But all told I it’s five skeins of DK yarn.
I wore this sweater to my virtual knitting retreat this past weekend and I got lots of Ooohs and Aaahs from the attendees. I can’t wait until it’s cold enough here to wear to work!
I have a finishing thing, and it’s not even Friday! My Retro Rainbow Vanilla Socks are finished, ends woven in, (not blocked) and photographed!
Pattern: 72 Stitch Toe Up Vanilla Socks (my own pattern)
Yarn: Muststash Yarn & Fiber Perfect Must Match in the Retro Rainbow colorway
Needles: US 0s
I used roughly 70 grams or 308 yards of yarn to make these two socks. They run a nice way up my calf. The negative ease is quite robust across the top of the foot but is fairly decent overall. I didn’t end up with a perfectly matching pair of socks. This was NOT a fault of the wonderfully dyed yarn. My gauge was slightly different on the second sock log and second heel. And therefore I ended up with fraternal twins instead of identical twins.
But for sure I’m going to have a really nice cozy and bright pair of socks for the coming winter. These are my first socks from this dyer so I’m excite to see how they wear. And yes, I will need to wash them but I just couldn’t be bothered to block them
My sock needles feel empty and cold so I need to figure out what to put on them next! Happy Knitting!!
I did it!! I produced a usable skein of yarn! My 70s Kitchen hand spun is washed, whacked and skein-ed up ready for a project.
I started with four ounces of 100% alpaca and ended up with 88 grams and 56 yards of a bulky yarn. It might be super bulky in some spots. It is a little ropey and still has some twist to the finished skein but I’m super proud.
I am pretty sure I want to knit with this right away. I did some Ravelry searching and found the Alpakka Har by Cait St. George that the toddler size would be just perfect for my yardage. As long as I hit gauge that is. But it’s a basic beanie so I think I can fudge it as needed.
My daycare provider is about to be a first time grandma. Her daughter is having a little baby girl in October. Both of these ladies hold a special place in my heart because they love my children almost as much as I do. So of course I needed to knit something!
I made a quick Lexi’s Knitted Tutu by Ashlee Lackovic this past weekend. I just grabbed some Caron Simply Soft acrylic for the waistband and some leftover Red Heart Boutique Sashay multicolor. This is just such a quick knit and it ends up looking more complicated that it actually is.
I finished off with some eggshell colored ribbon to make the waist tie. I think beginning to end this maybe took me an hour? The newborn size is like like 40 rounds of knitting. I can’t wait to wrap this precious gift up!
Mods: I added two inches of length to the body. And I knit custom sleeves where the decreases started at the elbow
I am probably one of the last knitters on earth to knit a Weekender. But I can see why it is so popular. It is an easy sweater to wear and to knit. I used just over five skeins of Rios, roughly 1,108 yards or 528 grams. I knit the 48.5 chest size with the modifications listed above. I am SUPER happy with my decision to alternate skeins. I think there is a some flashing and pooling but it’s consistent over the entire garment so it looks purposeful.
It is quite literally 95 degrees Fahrenheit (35 degrees Celsius) right now in Kansas. I DO NOT need a worsted weight sweater so into the cedar chest this project goes! But this finished object has really revved up my garment mojo. I’m already casting on my next sweater that I will share with you on Monday.
I got fed up and no shocker, I decided to finish my Prism Break Hat. I didn’t get to the pattern recommended length but I got to “good enough” and put the decreases in. I was ready to have a finished object, lol.
Pattern: Sockhead Slouch by Kelly McClure
Yarn: Wichita Woolery 100% Merino 4-ply in Prism Break Colorway
Needles: US 2s and US 3s
Mods: I got bored and didn’t knit to the full “traditional” slouch length and just finished the darn thing.
I am really pleased with how the colors pooled on this project. I got a really cool micro-stripe effect with the gauge I settled on. And the hat fits pretty nicely as well!
I only used about 60% of the skein of yarn. So I have plenty of yarn for my memory blanket and maybe even a contrast color for a second project? I have made like five of these hats and I have a full hat drawer but I can’t quit this pattern. It’s so soothing when my brain needs some auto pilot.
Happy Friday! To celebrate this week I have a new pair of socks to snuggle my feet in. My Antagonist Vanilla Socks are done, washed and blocked!
Pattern: Toe Up Vanilla Socks using 68 stitches and a gusset heel
Yarn: Stranded Dyeworks BFL Nylong Fingering in Antagonist color
Needles: US 1s
These are the perfect socks. They have a nice sturdy fabric thanks to the BFL fiber content but they are still next to skin super soft. The speckles really pop out of the dark grey main color. The fit is really good with plenty of room in the heel and the cuff hugs my leg just right amount.
I do have a decent amount of yarn left from the skein. I used 68 grams or 272 yards in my socks so I have roughly 130 yards left for my scrap projects. Which I’m not mad at. I definitely see more BFL socks in my future.
My Fluffy Sockhead slouch is done just in time for the temperatures to hit 70 degrees here in Kansas. Oh well, it’s super soft and a nice treat to tuck into my cedar chest!
Pattern: (Heavily Modified) Sockhead Slouch by Kelly McClure
Yarn: Apothefaery Fabrications Halo Brushed Suri and Middle of the Road Sock, held together
Needles: US 3 and US4
Mods: I used the basic stitch counts and decrease instructions, but otherwise I did my own thing with length of brim and length of slouch
I may have gone overboard after my too tight Everyday (Not So) Slouchy Beanie. This one is WAAY big on my head. It is a roomy fit for sure. It still is a functional and VERY warm hat. But I might have over corrected and gone too big. Nevertheless, I’m not ripping it out as I like the color blocking and it feels to good to empty a pair of needles.
This hat is for sure destined for the gift bin as the perfect head will present itself in the future. Maybe my next hat will be Goldilocks and fit JUST right?
Yarn: Apothefaery Fabrications Middle of the Road Sock and Halo Brushed Suri Alpaca
Needles: US 1 and US 4
Mods: Because of my gauge issues, I didn’t knit the full slouch so I could save some yarn for a second hat.
This hat fits my kids SUPER well. I can get it on my head but it’s REALLY tight. I blindly followed the pattern and made the medium size without checking gauge. Silver lining, the hat is very very warm. I’m not sure I’m going to trust my children with a hat made with indie dyed yarn. But I’m not sure I’m going to wear this either. So I am going to let this FO marinate in my cedar chest for the summer to see how I feel about it later.
The yarn is delightful! You can see the halo of the suri alpaca and the colors are very rich. I might have been drowning my canceled fiber show blue by popping over to Apothefaery Fabrications to buy more of her Halo Brushed Suri in some neutral colors. I want to try some more projects with this yarn!