Cast On: The Weekender #2

I did some soul searching about my Mycroft. It has been on the needles with approximately 10 rows knit since November 2020. I just never felt like working on it. So I frogged it, life is too short to knit project that don’t speak to you.

I ripped out all the Malabrigo and decided to make a second Weekender by Andrea Mowry. This time in a bigger size than my first one. I like and wear my first one but I want a cozier and slouchier version. Plus the pattern is easy and having been through it once before, I know the ropes. I need easy in my life!

I have my yarn caked, needles pulled and project bag organized. All that is left is to rewatch a tubular cast on video and have some uninterrupted time to get the hems on the needles. After that it’s just sweater round and round!

Happy Kniting!!

FO Friday: Weekender

I am beyond proud and excited to show you my first proper adult (and properly fitting) sweater! My Weekender is blocked, dried and thanks to portrait mode on my iPhone is got it’s final photographs!

Pattern: Weekender by Andrea Mowry

Yarn: Malabrigo Rios in Fresco y Seco

Needles: US 8s and 9s

Mods: I added two inches of length to the body. And I knit custom sleeves where the decreases started at the elbow

I am probably one of the last knitters on earth to knit a Weekender. But I can see why it is so popular. It is an easy sweater to wear and to knit. I used just over five skeins of Rios, roughly 1,108 yards or 528 grams. I knit the 48.5 chest size with the modifications listed above. I am SUPER happy with my decision to alternate skeins. I think there is a some flashing and pooling but it’s consistent over the entire garment so it looks purposeful.

It is quite literally 95 degrees Fahrenheit (35 degrees Celsius) right now in Kansas. I DO NOT need a worsted weight sweater so into the cedar chest this project goes! But this finished object has really revved up my garment mojo. I’m already casting on my next sweater that I will share with you on Monday.

Happy Knitting!

Into The Bath

My Weekender is 99.9% complete and getting its bath now. I had some false starts and ripping back on the first sleeve to get a fit I liked. But once I had my plan settled I quite literally zoomed through the second sleeve. It was so much easier to just count my rows and know exactly what I was doing next.

Now you might notice I said 99.9% done and keen eyes will see some blue tape and needles in the photo. I finished the knitting of the sleeves but I very purposefully didn’t bind off. This yarn is Malabrigo Rios, which is a superwash yarn. Odds are that this garment is going to GROW depending on how I block it. So to keep my cords and needles nice I used some painters tape to just keep them just above the water line.

After its bath my intent is to pull this sleeves as wide as I can in the upper arms to see if I can buy myself just a teensy bit more ease. But the fabric is going to want to stretch lengthwise regardless. I left the sleeves live just in case I need to rip back and shorten the sleeves if they come out ridiculously long.

I’m hoping that all these precautions will keep my knitting karma in check, the sleeves will turn out fine and I’ll just be able to do the tubular bind off once the sweater is dry. Fingers crossed!!

Happy Knitting!!

Winging It On Sleeve Island

I have officially reached sleeve island on my Weekender sweater!

I picked up the pattern recommended number of stitches at the arm hole and knit an inch or so to where the pattern wanted me to start decreasing. Then I stepped back and looked at my sleeve and looked my arm….and looked at my sleeve and back to my arm. I’m confident the sleeve will fit my upper arm as it is now but I’m just as confident it will not fit if I work the pattern decreases as written.

My arm and shoulders are a little robust from hauling around a 31 pound toddler who still likes to be carried and snuggled. My arms taper more sharply at my forearms to my wrist. So based on this I have decided to wing it for the sleeve shaping. I’m going to just knit and keep trying the sleeve on as I go. I’ll start my decrease at or just below the elbow. I dug out some locking stitch markers to start marking my decreases to help me remember how to knit the second sleeve.

I am also pleased to be using my Chia Goo mini twist set that I got last Christmas so that I can knit the sleeves on a tiny circular. This way I can just zoom along and not fuss with changing DPNs or creating ladders.

I’m really happy with this sweater and hope to have this done very soon. Though it is now officially 100 degrees Fahrenheit here in Kansas so I won’t get to wear it until the Fall. Oh well, sometimes it’s just about the process right?

Happy Knitting!!

A Body Complete

I did it! I finished the body of my Weekender!!

The short rows were easier than I thought and I did manage to do each side the same. The ribbing was a bit of a challenge as I had an extra stitch on one side and one short on the other. I just fudged it to make it work. And bonus, I was able to try this one!

As suspected, the sweater is not exceedingly oversized on me. It still has positive ease but it’s not exactly boxy on me as it is in the pattern. But the length is nice and I’m glad I added the 2-3 extra inches in the body.

I finished the body and I have two 100 gram skeins left for each sleeve. So I have more than enough yarn to knit each sleeve and I won’t have to alternate skeins. I measured the armhole and my arms will fit through but they don’t have a ton of ease either. I think I will have to call an audible and knit my own sleeves. I will not have a lot of space in the upper arms to do the decreases the pattern calls for. I think my plan is just to knit a tube to my elbow and then try it on. I will just crunch the numbers and plan out my decreases from elbow to wrist.

I’m getting so antsy to finish this! I can’t wait to wash and see how the final garment is going to come out. I am also seriously considering casting on a second one in the next size up right after I finish this one! Am I crazy?

Weekending Short Rows

I’m inching every closer to finishing my Weekender Sweater. I had split for the armholes and knit up both sides in the plain section. I’m finding it helpful to knit the sections in one after another. Meaning I knit up the front until I got the right height and then I counted my rows and knit up the back to same measurement.

The next step in this project is to knit a series of short rows before the final ribbing that will create the boat neck collar. I think I will like ways knit those in a similar fashion. I hope these will mean I can keep them symmetrical and therefore matching.

I’m keen to get this knit up and bound off so I can try the sweater on. I am thinking its not going to have as much ease as the pattern suggests. That is what I get for not swatching but I do believe blocking will add some because the Malabrigo is superwash. And for my body shape it is not always a bad thing not to have a huge amount of ease and be a little closer fitting. I just need to knit faster so I can find out!

Happy Knitting!

Adding To Weekender

I’ve been quietly working away on my Weekender Sweater. And as of last night I hit the pattern mentioned 15 inches of body knitting. I’m using helical knitting and I’m pleased with how the skeins are working out color wise.

Now here’s the deal, I have a friend from college theater group who also knits and she knit the Weekender last year. She did not add any length and regrets it. I want a big cozy sweater and I feel like my waistline post two babies and how tall my torso is……that 15 inches is not sufficient. I need to add some undetermined amount of body length.

My project has been made even cheerier by the unicorn stitch marker ala Hannah of the Corner of Craft. I have knit maybe three to three and half inches of body since I last blogged about this. I’m going to move my marker and keep knitting the body.

I hope to actually be allowed to see my Mom soon and have her help me measure my torso. I’d like to get an idea for my length from underarm to torso so that I can do some maths to figure out an optimal body length using the pattern schematic. And also to make sure I’ll have enough yarn to make decent sleeves, lol.

Happy Knitting!!

Weekender On The Weekend

As we slog through these last few confusing days of winter I find myself excited about Spring approaching in a few days. And in the spirit of spring cleaning (please ignore the not spring cleaned toys in the background) I found myself wanting to “clean up” my WIPs.

I pulled out my Weekender this past weekend and put a few rows on. I’m still slogging through the body but it makes for nice TV knitting with all the stockinette in the round. I have knit past my stitch markers for the purl details a few times. But those are easily fixed.

I’m not finding myself super engaged in this project so I don’t expect it to fly off the needles anytime soon. But I’m hoping this will be a slow and steady tortoise like project that I can enjoy next Fall maybe?

Happy Knitting!!

My Current State

Hey guess what? The laundry from yesterday is still there. I decided it was a good idea to delegate the folding to my hubby since I washed and dried it all. But he has a different world view on how quickly these kinds of things should be done. I’m curious to see how long it will take to get put away? For now, I’m just dressing Jellybean and PB from the baskets, lol.

But for now I have comfy yoga pants and my Weekender Sweater. The ladders are still there no matter what I try so I’m hoping that the blog advice that they will block out and even out when its done is true. So far I’m really pleased with the even colors I’m getting with the helical knitting. I have almost put one complete ball of the Malabrigo Rios into this sweater. Here’s hoping the next balls fades in nicely as well!

Happy Knitting!!

Ladders….Not The Good Kind

I have continued to pick up my Weekender and knit a few rounds at least a couple times the past week. This is good knitting for movie night with the husband because I only have to pay attention to two spots and they have stitch markers. I am now just beyond four inches done for the body. But once again that little knitter in the back of my brain was jumping up and down trying to get me to notice something…

I am getting pretty significant ladders on the other side of my slip stitch detail. Like I can see my fingers through them when I pull at the work. I am pretty sure this has something to do with my tension and I am working the slipped stitch.

Now the really big question is….how much does this bother me? You can’t really see it when the knit just hangs. But I feel like I could adjust my technique and correct for this. Am I really ready to rip back four inches of sweater body? I think I need to sleep on this one…